Current Location:Home > Products >

Micro heat adsorption dryer

Working conditions:

air dew point: -40 ℃ (-70 ℃ or other pressure dew point requirements can be customized)
inlet temperature: ≤ 45 ℃
Working pressure: 0.6-1.0 Mpa
pressure loss: ≤ 0.02Mpa
regeneration air volume: ≤ 7%
regeneration gas: inlet pressure of 4-7%
Regeneration mode: Micro thermal regeneration
◆ desiccant beds to ensure a large capacity of air in contact with the desiccant has sufficient time to allow the desiccant to absorb moisture, to stabilize the outlet dew point. Plus 30% extra desiccant desiccant can make the natural aging and prolong life.
◆ The unique design of removable stainless steel diffuser evenly distributed towers the gas, to avoid channeling phenomenon.
◆ multi-cycle micro-heating devices, heating, high efficiency, low air consumption, maximum reduction of energy consumption.
◆ advanced microcomputer control system with automatic chronograph, automatic switching, working time setting, fault alarm functions.
◆ may need optional dew point monitoring and control system.

关闭